CA-70 MODULAR MIC/LINE AMPLIFIER
The CA-70 preamp module pays homage to the classic American two-stage circuit invented by Western Electric™ in 1913 and manufactured by multiple companys from the 1930s through the 1950s – most notably RCA™, Gates™, and Langevin™. This old octal tube circuit has a huge thick tone and is what many consider to be the quintessential “old tube preamp” sound.
The CA-70 PS6 preamp module uses our own Coil Audio transformers, high quality capacitors, resistors, and NOS octal tubes. It's powered by our PS6 Rack Tray and Power Supply.
The (INPUT) pad section contains a phase reverse switch, and a 6 position pad network. The first four positions are various 150/250 ohm mic pads; -6db, -12db, and -19db. The final two (LN 1 & LN 2) positions allows line-level signals to run through the amplifier providing tone-shaping capabilities while mixing from your DAW, Tape Machine, or other Line Level Devices – including other Preamps.
The (NF) control varies the amount of Negative Feedback present in the circuit. Counter-clockwise brightens and moves the sound forward while raising harmonics and sensitivity. Turning it clockwise increases negative feedback, producing a darker tone with a smooth, dampened harmonic structure.
The (HI) switch transitions from the natural openness of the tubes to a gentle filtering of upper frequencies. The (LOW) switch reacts with the NF, boosting or cutting low frequency while moving the low end from front to back in the sound stage.
The OUTPUT control knob is placed between the 1st stage 6J7 and 2nd stage 6C5 tubes and sets the final level Output level.
Specifications
- 16 ga. Stainless Steel Module with Integrated XLR I/O
- Coil Audio CT-110HN high nickel input and CT-41 output transformers
installed. - 12-Step Switched Negative feedback tone control with LOW/HIGH filters.
- Two-stage 6J7/6C5 vacuum tube single ended parafeed circuit.
- 42db-54db of available gain.
- 150 Ohm and 2k Mic input, 20k Line input, 600 Ohm output.
- 4 Position PAD for both Mic and Line Input.
- True 180-degree Phase Switch
- Up to 6 PS6 MK2 Series Modules mount into 7U PS6 Rack Tray.
- Hand built and tested in the USA.
- NOTE: **PS6 MK2 RACK TRAY AND PSU REQUIRED FOR OPERATION**
