This is the BigAmp Piezo version.
A piëzo transducer typically has an impedance of several Mega Ohms, which is much higher compared to the high-Z input of instrument preamps or mixing consoles. This prevents the transducer to deliver its potential output signal to the preamp and restricts transient response. Additionally, the high impedance combined with the capacity of the cable to the preamp forms a low pass filter, making a piëzo transducer often sound uninspiring.
BigAmp Piëzo is a BigAmp version specially designed to overcome above issues. It has a 7.5 Mega Ohms input Impedance, which enables the piëzo transducer to deliver its full potential. Signal amplification is low (3dB) to allow for the highest possible headroom. Because of its small size BigAmp piëzo can be connected as close to the transducer as possible which keeps cable capacitance to a minimum.
BigAmp Piëzo can be distinguished by the type identification ring below the TritonAudio label.
Triton Audio BigAmp Features
- Low noise Class A JFet amplifier
- 12db amplification
- Single ended amplifier topology
- Balanced output
- Z-in 1 MOhm (7.5MOhm BigAmp Piëzo Model)
- Lots of headroom
- 18-48 v phantom power