Q2 AUDIO COMPEX F765 500

$1,200.00
Adding to cart… The item has been added
Stock Item, Usually Ships Same or Next Business Day

Stock Item: Ships from our shelf quickly in almost all cases when ordered before our ship cutoff times.

Direct Ship: Non-stock item, but normally ships quickly from the manufacturer or alternate warehouse.

Built To Order: Item is custom built per the options chosen and quickly shipped out upon completion.

More On The Way: The manufacturer is experiencing delays, but we'll ship quickly upon arrival.

New Item: We have this on order, the manufacturer hasn't shipped but you'll be in line upon arrival.

Visit our Shipping Page for cutoff times for FREE (USA), UPS, USPS or FedEx.

Visit our Returns Page for info on non-returnable, special order non-stock items.

Looking for a stereo pair? See our stereo pair listing here.

Manufactured by Q2 Audio in close collaboration with Audio & Design, the F765 Compressor/Limiter Module is a remake of the classic F760-N module and has now been adapted to the 500 series modular rack system. It is authentic in every detail and reproduces the exact sonic qualities of the original product.

Using the original discrete analogue circuit design employing a feedback FET technique and maintaining the use of the same components that give this product such a distinctive sound, the new F765 compressor/limiter will add dynamic punch to your sound as well as controlling peak excursions.

The original F760-N module was used by major recording artists worldwide throughout the 60s, 70s, and 80s. This famous, iconic processor was instrumental in shaping the sounds of that era. Now as the F765 it returns to take a worthy place in the ever-popular 500 series rack system with it’s unique signature on the sounds of today.

Features

  • Single channel level control offering simultaneous compression gain reduction with peak limiting
  • Precision calibrated compressor/limiter threshold control which allows the user to “dial up” the amount of compression required before peak limiting occurs
  • Switched Compression values from 1:1 (amplifier), 2:1, 3:1, 5:1, 10:1 & 20:1 (limiter)
  • Auto dual platform release function – allows fast transient recovery on a “build-up” slow release

Specifications

  • Input: 10K ohms Unbalanced
  • Output: Transformer Balanced (Cinemag CMOB-3L) Max output: 20dBu, 18.5dBm
  • Metering: Sifam Fast Responding analog meter
  • Stereo Linking: Must order as stereo pair
  • Power requirements: +/-16V DC @ 70mA per rail (brief 400mA turn-on surge).
  • System Gain: 34dB with input/output attenuators fully open. Unity gain in Bypass mode
  • Thresholds:
  • Peak Limiter: +14dBu maximum with unattenuated output. Referred to unattenuated input level 20dBu
  • Compressor: Calibrated with reference to Peak Limiter thresholds and marked 0 – 20dB in 2dB steps. (Reference to unattenuated input level this is -20dBu to -40dBu)
  • Release:
  • Peak Limiter: 250mS,
  • Compressor: 25mS, 50mS, 100mS, 200mS, 400mS, 800mS, 1.6 secs, 3.2 secs + Auto release function
  • Attack:
  • Peak Limiter: < 250uS for 100% control of overshoot – without any over limiting. (measured at 1KHz for 10dB gain reduction)
  • Compressor: 250uS, 2.5mS, 25mS
  • Distortion: Measured at 1KHz for 10dB compression & 3.2 secs release time.
  • Compressor: at +10dBu threshold <0.1% (typically 0.04%)
  • Peak Limiter: at +14dBu threshold <0.3%
  • Frequency Response:
  • Balanced: < -0.5dB at 20Hz & < -0.75dB at 20KHz
  • Signal – Noise Ratio: Referred to Peak Limiter threshold level as set by output attenuator: better than -80dB (Measured with low pass filter -3dB at 25HKz)
  • Stereo Matching:
  • Control volts matching on compressor to within ±1dB of each other, consequently no image shift during operation
  • Selectable Peak Limiter operation
  • Peak Limiter on – off or Pre-emph (50uS time constant)
  • Indicators:
  • Overall Gain Reduction Meter scaled 0 – 20dB in 4dB divisions. White scale on black background with yellow pointer
  • Peak Limiter operating: Red indicator

Enhancements

  • Gold contact rotary switches
  • Gold contact toggle switches
  • Conductive plastic potentiometers
  • PCB headers for possible future connection to E900 type EQ
  • Sidechain Insert and Bus output functionality per Radial Engineering specs
  • Sidechain insert is jumpered by default
  • Sidechain insert send minimum external load of 10K

Please note: stereo pairs must be ordered as such. Attempting to stereo link two random units is not advised.

Our ONE WITH EVERYTHING ZEN WARRANTY extends the standard manufacturer warranty by one year, see our ZEN WARRANTY page for details.

Videos Hide Videos Show Videos