IGS Audio V8


The V8 compressor is built solely with discrete components and six Carnhill transformers (three per channel). The element responsible for the compression is the bridge composed of 4 pulse diodes matched by hand, according to carefully developed procedures. The device is constructed as a dual mono unit with the option of linking the sidechain circuitry. All manipulators are stepped, for excellent channel matching.

The V8 compressor is also equipped with a HPF Sidechain. This feature allows you to cut the lowest frequencies from the signal, before they hit the compressor stage and allow, for example the kick drum, to go through without the pumping effect. An additional switch on the front (+10THR) lowers the compressor's threshold level by an extra 10dB. This feature is useful when compressing very low signals or for very strong compression. Typical application for IGS V8 is bus compression. However, due to its nature and the incredible range of tone and color settings, uses of the V8 compressor are unlimited.

IGS Audio V8 Specifications

  • Stereo Link:  Yes
  • Sidechain HPF:  OFF, 40, 80, 120, 180, 240, 320Hz
  • All stepped manipulators:  Yes
  • Input Impedance (balanced):  10k Ohm
  • Output Impedance (balanced):  600 Ohm
  • Audio transformers:  Yes, Carnhill (input, output, interstage - 3 per channel)
  • Operating Level:  +4 dBu
  • Max input level:  >+22 dBu
  • Max output level:  >+22 dBu
  • Dynamic Range:  101 dBA (@ 1kHz, +24 dBu)
  • Max. gain:  22 dB
  • Max Gain Reduction:  30 dB
  • Attack:  0.1 – 30 ms
  • Release:  0.1 to 1,4s + auto
  • Fequency response:  20Hz to 20kHz; +0.2dB / -0.4dB
  • Signal to Noise Ratio:  87 dBA @ 20-20kHz
  • THD+N:  0.056 % @ 20-20kHz
  • IMD (SMPTE):  0.16% @ 20-20kHz
  • Crosstalk:  91dB @ 20-20kHz
  • Voltage:  115/230V AC, 50 - 60Hz
  • Power consumption:  24W
  • Power supply:  Internal


Our ONE WITH EVERYTHING ZEN WARRANTY extends the standard manufacturer warranty by one year, see our ZEN WARRANTY page for details.

Recently Viewed Items