Thick and rich tone is what this API 500 Lunchbox compatible pre will spit out all over your tracks, check it out today!
A thick and rich sound awaits if needed, just switch from FET to TUBE mode and push this pre into heavenly driven goodness!
This is the single slot 500 series format unit. The required operating voltage is provided by a purpose designed low noise discrete dc/dc step-up converter which feeds its power to D2O's low noise, low esr voltage regulator. Further internal operation is equal to the standalone version.
D2O is a low noise discrete microphone preamp, it is a further development of the famous German V series preamps of the 40's and 50's, widely recognized as one of the best sounding preamps.
D2O is available in three versions
- A single unit standalone preamp
- A 19" Stereo rack mountable version
- A single slot 500 format unit
D2O's general layout consists of a Lundahl 1571 input transformer followed by 2 single ended gain stages. The second gain stage can be selected to be either a high gain Fet or a Tube stage. when the high gain, all Fet circuit is engaged D2O becomes an ideal companion for microphones with a relatively low output like ribbon microphones. With the hybrid Fet/Tube circuit is engaged the sonic benefits of having a tube in the signal path can be utilized. Output drive is supplied by a discrete low impedance Fet buffer with superb sonic properties. Quality Paper in oil coupling capacitors are used, all other used components are high-end grade aswell.
Low noise / low esr power supply
In single ended preamp designs the quality of the power supply is crucial, D2O is fitted with a discrete low esr voltage regulator built with low noise components enabling optimal performance to the amplifier circuit.
Switchable transformer ratio / input impedance
By selecting the transformer ratio switch a selection between a 1:1.75 (LO) or 1:3.5 (HI) transformation ratio can be made. Besides setting voltage gain, this also switches the input impedance of the amplifier between 2.25KOhm and 6.25 KOhm. Different transformation rate and impedance selection options are very desirable as they allow for more sonic options from the connected microphone.
Selectable all Fet or Tube-Fet circuit
The Tube-Fet switch determines whether D2O functions as an hi gain, all Fet or hybrid Tube-Fet circuit, each with its unique sonic character.
- Stepped attenuator
- Phase reverse switch
- Phantom power
- Overload indicator
- Gain D2O all Fet: 70 dB
- Gain D2O Tube/Fet: 60 dB
- EIN: -128dB
- Headroom: 32 dB
- Input impedance: 2,25 KOhm / 6.25K Ohm
- Output impedance: 100 Ohm
- Power supply: 24V AC
- Input: XLR
- Output: XLR / 1/4" jack