D.W. Fearn VT-12

$4,800.00
Direct Ship, Non-Stock But Normally Ships Quickly

Stock Item: Ships from our shelf quickly in almost all cases when ordered before our ship cutoff times.

Direct Ship: Non-stock item, but normally ships quickly from the manufacturer or alternate warehouse.

Built To Order: Item is custom built per the options chosen and quickly shipped out upon completion.

More On The Way: The manufacturer is experiencing delays, but we'll ship quickly upon arrival.

New Item: We have this on order, the manufacturer hasn't shipped but you'll be in line upon arrival.

Visit our Shipping Page for cutoff times for FREE (USA), UPS, USPS or FedEx.

Visit our Returns Page for info on non-returnable, special order non-stock items.


The D.W. Fearn VT-12 Vacuum tube 70dB microphone Preamplifier is designed to accommodate the low output level of ribbon and dynamic microphones. it can also be used with condenser microphones. (Our VT-1 and VT-2 Vacuum tube microphone Preamplifiers are optimized for condensers.)

The VT-12 is very similar to our VT-2, but with higher gain (the VT-2 has 53dB of gain). We use the same custom Jensen transformers and the same sonic philosophy as the VT-2. So the trademark sound is there — definitely in the D.W. Fearn family of products.

To make the VT-12 more versatile, we include provision for phantom powering condenser microphones (and ribbon mics that require phantom power). But since many engineers are concerned about possible damage to ribbon mics if phantom power is accidentally applied, we have a rear panel switch that disables all possibility of applying phantom power. The front panel “+48” switches are inoperative in this mode, and a dual red/green indicator displays the status (green for disabled phantom power, off when phantom power is available but not turned on, and red when phantom power is turned on.)

Specifications

  • (no gain reduction, unity gain)
  • Frequency Response: +0.25dB 20Hz-20kHz (-3dB at 0.5Hz and 60kHz)
  • THD+Noise: <0.3% 20Hz-20kHz
  • Noise: <-72dBu, unweighted
  • Input Load Impedance: 10k ohm
  • Maximum Input Level for 1% THD at 20Hz: -25dBu (-5dBu with pad)
  • Maximum Gain: 70dB
  • Input: Transformer balanced
  • Output: Transformer balanced
  • Maximum Output Level: +22dBu into 20k ohm bridging load
  • Dimensions: 19W x 5.25H x 10D (inches)
  • (48 x 13 x 25 cm)
  • Weight: 18 lbs (8.2kg)
  • Shipping Weight: 24 lbs (11kg)
Our ONE WITH EVERYTHING ZEN WARRANTY extends the standard manufacturer warranty by one year, see our ZEN WARRANTY page for details.

Recently Viewed Items