Avedis Audio Line Pad Z

$35.00

Enter your email address to be notified when this item is in stock.

More On The Way, Get In Line For Our Earliest Ship Time

Stock Item: Ships from our shelf quickly in almost all cases when ordered before our ship cutoff times.

Direct Ship: Non-stock item, but normally ships quickly from the manufacturer or alternate warehouse.

Built To Order: Item is custom built per the options chosen and quickly shipped out upon completion.

More On The Way: The manufacturer is experiencing delays, but we'll ship quickly upon arrival.

New Item: We have this on order, the manufacturer hasn't shipped but you'll be in line upon arrival.

Visit our Shipping Page for cutoff times for FREE (USA), UPS, USPS or FedEx.

Visit our Returns Page for info on non-returnable, special order non-stock items.


The perfect partner piece for your 500 series MA5 preamp!

The LINE PAD-Z is designed for mic pre's without line inputs, such as the MA5, enabling you to plug a line signal into the mic input.

The LINE PAD-Z adaptor serves three important purposes: 1) It provides the proper load to your PT or other converters without overloading them. 2) It drops the level -35dB, to the range of a microphone. 3) Its output impedance "looks" like a microphone to the MA5 preamp, so source impedances appear normal.

With the use of the LINE PAD-Z on the input of the MA5, unity gain would be at the 35dB position on the gain switch, with the output turned all the way up.

IMPORTANT: When coming out of the preamp into the A/D converter, you must go into the LINE input of your digital converter, not the MIC input which would add gain; otherwise you will have headroom issues and a poor signal-to-noise ratio. Some inputs are both, so you must switch to LINE input or use the TRS part of the combo XLR - read the manual to find out.

The LINE PAD-Z works very well and can be used with other high quality, low noise preamps. Not recommended for unbalanced interfaces. DO NOT ENGAGE PHANTOM POWER WHEN USING THIS LINE PAD!

Avedis LINE PAD-Z Specifications

  • Made with Switchcraft parts
  • Input impedance = 10K ohms
  • Attenuation = -36dB
  • Output impedance = 150 ohms
Our ONE WITH EVERYTHING ZEN WARRANTY extends the standard manufacturer warranty by one year, see our ZEN WARRANTY page for details.

Recently Viewed Items