|
|
View Larger Image
|
|
Radial Pro RMP |
|
Fake Price: $115.00
Real Price: $99.00
Usually Ships Same or Next Business Day ?
FREE / Upgrade Cable Option:
|
|
Radial Engineering Pro RMP re-amping box Description
re-amping has been
the 'secret weapon' for countless recordings by the biggest names in the
business and the process is often used on guitars, bass, keyboards, percussion
and even voice to create new textures! The Radial ProRMP is a 100% passive
re-amplifier that lets you to take a pre-recorded track and re-amplify it
through a guitar amp or effects pedals to create new and exciting tones.
Plug and
play easy to use, the ProRMP connects from the recorder to your amp and effects
units and does all the impedance matching for you. Just adjust the level to
suit!
The magic behind the ProRMP's great tone is a custom wound transformer that at
once converts the balanced low-z source to a hi-z input for your amp while also
acting as an electrical isolator to eliminate troublesome ground loops that can
often cause buzz and hum in the sound.
Like all Radial products, the ProRMP is built tough! Encased in a 14 gauge
steel, the ProRMP employs a unique book-end design with a welded I-beam frame
that protects it from damage and assures the PC board and solder points will
not be stressed, adding durability. A full-bottom no-slip pad works double duty
by providing plenty of stay put while also eliminating electrical contact
points from guitar amp chassis bolts that could cause ground loops.
The Radial ProRMP - affordable professional re-amping for every studio!
Radial Engineering Pro RMP re-amping box Features
- Play prerecorded
tracks through amps and pedals
-
Opens the door to creative new tones and textures
-
Eliminates repetitive playing during recording
-
On board level control for fine tuning the gain
-
Transformer isolated to eliminate buzz and hum
Radial Engineering Pro RMP re-amping box Application
Plug a standard balanced cable from your recorder or
mixer output to the ProRMP's XLR input. Connect the 1/4" ProRMP output to
your instrument amp. Adjust the ProRMP's output level control as required to
match the amp input and engage the ground lift switch to eliminate any hum and
buzz caused by ground loops.
Applications - great for re-amping all instruments including:
Electric guitars
Bass guitars
Keyboards
Electric violin
Voice
Percussion
|
Radial Pro RMP Review
/ See
All ZenPro Audio Reviews Here: Review Page
The PRO-RMP is one of those “it just works” devices that you don’t need fancy
features for most times. Built like a tank (like all Radial products you could
run over it with a truck and it’s going to be fine) and should last a lifetime.
I like the bright blue color, it’s easier to locate it in my somewhat dark
studio. You get an XLR balanced input and ground lift on one side, you get a ¼”
instrument level output (50kOhm)and trim on the other.
I have found the ProRMP to sound
extremely clean and true to the original source. I typically track with a
Radial JDI passive DI so I can capture the clean DI track to “tape” (DAW) with
a clean A/D converter, in case I need to re-amplify a source later. Being able
to choose different amps during mixdown is of course a very nice option to have
and the ProRMP tackles the job no problem. Just run it line level back out of
the DAW or recorder and into the XLR input, plug an instrument cable into the
output and feed your amp (some use re-amp boxes to interface instrument level
effects during mixdown too). You can lift the ground and tweak the send level
to perfection.
Conclusion: I’ve owned the expensive
reamp boxes, the ProRMP is every bit as good at half the price. A serious no
brainer if you’re looking for amp choices during the mixdown process.
|
|
|
|
|