|
|
Radial Engineering ProD8 Description
The ProD8 is a high
density rackmount 8-channel 19" direct box that is specifically designed
to interface keyboards and pre-recorded backing tracks to the PA system with
redundant inputs for live performance back-up.
The ProD8's input panel is equipped with two A-B ¼" inputs per DI channel
for main and back-up sources, throughput for personal monitoring and an effects
loop that allows both A-B sources to share the same effects for each channel.
The output panel features a XLR connector, -15dB input pad selector and ground
lift witch. A 180º polarity reverse switch is internally mounted and factory
set with pin 2 hot. Completely passive, the ProD8 employs eight custom wound
Radial transformers that are linear from 20Hz to 18kHz and able to withstand
highly dynamic levels from sources such as digital samplers and drum machines
without flinching. To reduce interference from outside magnetic fields, the
transformers are equipped with a mu-metal-nickel outer shield thus reducing
phase distortion to an absolute minimum.
For greater system setup flexibility, the Radial ProD8 features a reversible
set of rack ears that allows the ¼" input panel or the XLR output panels
to be position at the front or back, depending on the system engineers
preference.
Radial Engineering ProD8
Features
- Eight Radial DI's in a high density rack format
-
Redundant input conectors for 'main' and 'backup' inputs
-
Custom Radial transformers for linear performance
-
Designed to handle highly dynamic sources
-
Rack ears reverse so either panel can face front
|
|
|
|