Luke Audio AL-Y56
Multi-Capsule Large Diaphragm Condenser Tube Microphone, Emulates CK12, K67 and K47 Capsules, Includes Cable, Shock Mount and Case
Pay over time with , apply during checkout.
Stock Item: Ships from our shelf quickly in almost all cases when ordered before our ship cutoff times.
Direct Ship: Non-stock item, but normally ships quickly from the manufacturer or alternate warehouse.
Built To Order: Item is custom built per the options chosen and quickly shipped out upon completion.
Visit our Shipping Page for cutoff times for FREE (USA), USPS or FedEx.
Hear it in our Clipalator with all capsules now!
The AL-Y56 is a high-end, large diaphragm, tube condenser, “pop top” microphone with three distinctly voiced, interchangeable, hand built capsules. The extreme versatility of the Y56 with its 3, included, hot swappable capsules yields a microphone capable of your wildest dreams. It features a 6072a vacuum tube, 11.5:1 output transformer, 10dB pad, and only the finest hand selected components. From light and airy, to full and warm. The Y56 will supply you with the tonal characteristics you desire!
The Y56 was designed for use in pro studios, home studios, broadcast, and even live applications. With it’s unmatched ability to faithfully capture a vast array of sources correctly and naturally, you will find that the Y56 shines on vocals, acoustic guitar, acoustic bass, electric guitar, electric bass, drums, piano, strings, brass, woodwinds, and ANY source it is put in front of. Having the choice of three true high end tube microphones at such a great price point ($999) is completely unrivaled in the pro-audio world and an absolute must have for a mic locker of any size.
The Y56 is supplied with three distinctly voiced large diaphragm capsules. Each capsule backplate is precision machined and hand lapped to extremely tight tolerances then sent to the Luke Audio “Clean Room” to build. In the “Clean Room” each diaphragm is made by stretching a piece of 1 Micron thin Mylar and coating it with a layer of pure Platinum via our state of the art Cressington sputter coater machine. Each capsule is meticulously assembled, tested through a vigorous and time consuming process, and fine tuned to ensure each capsule of a given type is exactly the same as every other one produced by Luke Audio. The Capsule is the most important part of the microphone. It is the head of the chain and the transducer that physically interacts and captures the movement of air from the source material. If the capsule is not the absolute best (as in most microphones which use the same mass produced imported capsules) then you must compensate for the below par capsule in the construction of the circuitry or furthermore with EQ, therefore loosing some of the life and reality that is present with a “perfect capsule”. At Luke Audio we pride ourselves on building only the “perfect capsule”
The A1 is a custom reproduction of the ck12 type capsule found in vintage greats such as the C12 and ELAM microphones. This edge terminated, dual backplate design when used in conjunction with the Y56 yields a microphone with a bright, airy, and open feel.
The A2 is a custom reproduction of the k67 type capsule found in such mics as the vintage studio workhorse, the U67. The center terminated dual backplate design in conjunction with the Y56 yields a more mid focused, punchy, and articulate capturing of the source material.
The A3 is a custom reproduction of the k47 type capsule found in the legendary U47 microphone. The center terminated single backplate design yields a full bodied, rounded, and warm capture of the source material with a true “vintage” feel.
- Power supply
- 7 pin XLR cable
- wooden mic box
- wooden capsule box
- aluminum flight case
- shock mount
- power cable
- Type: Pressure Gradient Condenser
- Capsule: A1 1 Micron Platinum
- Tube: EHX 6072A
- Transformer: Custom 11.5:1
- Polar Pattern: Cardioid
- Frequency Range: 20Hz-20KHz
- Sensitivity: -33dB / -36dB
- Output Impedance: <100 Ohms
- Max SPL: 136 dB
- Signal to Noise Ratio: 76dB
- Dimensions (mic): 65x50x265 mm
- Weight (mic): 866g
Our ONE WITH EVERYTHING ZEN WARRANTY extends the standard manufacturer warranty by one year, see our ZEN WARRANTY page for details.