Heritage Audio 1073/500 Anniversary Edition
500 Series 1073 Reproduction Preamp Equalizer, Anniversary Edition
Pay over time with , apply during checkout.
Stock Item: Ships from our shelf quickly in almost all cases when ordered before our ship cutoff times.
Direct Ship: Non-stock item, but normally ships quickly from the manufacturer or alternate warehouse.
Built To Order: Item is custom built per the options chosen and quickly shipped out upon completion.
Visit our Shipping Page for cutoff times for FREE (USA), USPS or FedEx.
Celebrate audio goodness with the Anniversary Edition, featuring an output control knob!
When we came with the idea of making our 1073 version in an API VPR series 500 module, first thing we noticed was how many compromises our competitors had to assume to fit their repros in such a small package.
We decided to make exactly zero compromises on ours. This meant making a 3u wide module capable of holding all three vintage accurate transformers, dual concentric switches , pushbuttons and same exact PCB cards. Exactly what the name says. No downsized knobs. No transformers left out. No ICs in place of discrete class A circuitry. Just what the faceplate says: a 1073 in a 500 series format.
Heritage Audio 1073/500 Features
- 70dB Class A Microphone preamplifier, HI-LO selectable minimum input impedance, balanced and floating. High gain positions show a higher impedance, ideal for old ribbon mics
- 10dB Class A Line Amplifier, Bridging input impedance, balanced and floating
- Class A, single ended, 2N3055 driven high headroom output stage
- High Frequency: +/-16dB shelving at 12 kHz, Baxandall type
- Low Frequency: +/-16dB with selectable frequency shelving of 35Hz, 60Hz, 110Hz & 220Hz, Baxandall type
- Mid Frequency: +/-18dB peaking, fixed 'Q' , selectable center frequencies of 0.36kHz, 0.7kHz, 1.6kHz, 3.2kHz, 4.8kHz , and 7.2kHz , dual inductor based
- High Pass Filter: 18dB per octave slope, switchable between 50Hz, 80Hz , 160 Hz & 300Hz, inductor based
- EQ Button: Switches the equalizer on or off
- Phase Button: Flips phase 180º
Heritage Audio 1073/500 Specifications
- Microphone input impedance: HI, 1200 Ohm minimum, LO, 300 Ohm minimum. Higher gain positions gradually have greater impedances, optimum for lo gain ribbon mics. Input is transformer balanced and floating
- Line input impedance: 10KOhms bridging, transformer balanced and floating
- Output impedance: Less than 75 Ohms, transformer balanced and floating, to drive a load of 600 Ohms
- Maximum output: Greater than +26dBm into 600 Ohms, greater than +32dBu into 10KOhms
- THD: Less than 0.025% at 1Khz, Less than 0.05% at 100Hz
- Frequency response :20Hz (+0.3dB) to 20Khz (-0.2dB)
Our ONE WITH EVERYTHING ZEN WARRANTY adds a full year to the standard manufacturer warranty at no charge, see our ZEN WARRANTY page for details.