|
|
ART Phantom I - 48V Phantom Power
Supply Description
Different condenser microphones specify different amounts of required phantom
power. As a rule these ratings can range from 48 volts all the way down to 9
volts. Fortunately, there is some flexibility in terms of matching phantom
voltage to your mic. A rough rule of thumb would be “more is better.”
For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact,
mics rated at as little as 9 volts can often operate on 48 volts, but you
should check with the manufacturer first. Conversely, a mic will generally
perform best driven by not less than its rated voltage so, for a 48V mic, you
would obtain best results with 48 volts of phantom power. The Phantom I is a
great choice for the above needs.
ART Phantom I - 48V Phantom Power Supply
Specifications
- Input Connectors:
XLR female
- Output Connectors:
XLR male
- Frequency Response:
10Hz – 25kHz
- Output Phantom Power:
48V DC +/- 2V
- Output Noise:
-115 dBV
- Current Drain:
14mA
- Power: 18V
DC (Adapter included)
- Dimensions:
5.25x2.75x1.75 inches (130mm x 74mm x 45mm)
- Weight: 1.3
lbs. (315g)
|
|
|
|