|
|
ADK Custom Shop CS-12 Description
Class A (Discrete) 9 Polar-Pattern Tube (Valve) Condenser Microphone built as a "One-Off" using Customize Belgium-Design PC Board built with Hi-Fi Methods and Materials, using a "No-Corners-Cut" Approach. Features German Hand-Selected Valve, Top-of-the-Line Components (including a $6 Resistor!) with Australian-Designed GK12 from the Custom Shop "Capsule-Bank". Based on ADK's Area 51 TT Chassis, this is a totally Customized Product can be built "One-Off" for each client based on one's preference for Historical, Vintage Curves -Microphone Response Characteristics.
Capsule and Electronics have both been totally upgraded on CS-12.
The CS-12 is the Most Brilliant of all ADK CS-Series Custom Valve Microphones. Almost Effervescent High-End.
ADK Custom Shop CS-12 Specifications
- CAPSULE TYPE: True condenser pressure gradient; dual 1 six microns diaphragms
- IMPEDANCE CONVERTER: 9 pin twin triode; one 12AX7 and one 12AY7 included
- POLAR PATTERN: 9 patterns including Omni, Cardioid, Figure 8 and 6 intermediate positions
- SENSITIVITY: 19mV/Pa = -32dBu (0 dBV = 1v/Pa) (with our 12AX7 tube)
- FREQUENCY RANGE: 20 Hz to 20k Hz
- OUTPUT IMPEDANCE: < 250 Ohms
- RECOMMENDED LOAD IMPEDANCE: > 1200 Ohms
- MAX SPL FOR 1% THD @ 1000 Hz: 125 dB (with 12AX7 tube)
- EQUIVALENT NOISE LEVEL: 17 dBA Typical (IEC 286-4) (with our 12AX7 tube)
- S/N RATIO @ 1Pa: 76 dB
- POWER REQUIREMENT: Dedicated ADK Custom Shop power supply
- RELATIVE HUMIDITY: 90% (C) / 85% (C)
- CONNECTOR: 7 pin multi-pin cable (supplied)
- SIZE: Diameter 53mm (2.1) Length 225mm (8.9)
- NET WEIGHT: 750gm (26.5oz)
|
|
|
|